BALL BEARING UNITS

UCP Pillow Block Units NAP Pillow Block Units

UCP is a pillow block unit with a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions.
Available from 12 mm & 1/2" to 140 mm bore with standard , medium, and heavy duties
Cast iron housing

NAP is a pillow block unit with an eccentric locking collar insert that provides a very secure grip to the shaft that becomes even more secure during continued operation. It is specifically used for single-direction/non-reversing rotation.
Available from 12 mm & 1/2" to 2-15/16" bore with standard and heavy duties
Cast iron housing
NCP Pillow Block Units UKP Pillow Block Units

NCP is a pillow block unit with a specially designed concentric locking collar that provides 360 degrees of shaft contact. It produces a more concentric lock on the shaft compared to other locking styles and it functions very well for high speed applications.
Available from 20 mm & 3/4" to 60mm 2-7/16" bore with standard duty
Cast iron housing

UKP is a pillow block unit with a tapered-bore bearing insert that utilizes an adapter sleeve assembly to produce a highly concentric and secure lock on the shaft to reduce slippage and fretting corrosion even under adverse conditions.
Available from 20 mm to 125 mm bore with standard , medium, and heavy duties
Cast iron housing
UCIP Thick Pillow Block Units UCPA & UCPAN Tapped-Base Pillow Block Units

UCIP is a pillow block unit with a highly rigid and rugged casting for particularly demanding applications. The two bolt holes are round for more accurate positioning and the strength ratings of the housing are substantially improved over standard pillow block housings. Available from 40 mm & 1-1/2" to 140 mm bore with standard and heavy duties. Cast iron housing, UK style is also available.

UCPA and UCPAN are tapped-base pillow blocks with threaded bolt holes in the bottom of the housings. They are ideal for exact unit positioning and limited space applications. They are available in both inch and metric bolt-hole dimensions.
Available from 12 mm & 1/2" to 50 mm & 2" bore with standard duty
Cast iron housing
NA, NC & UK style are also available.

UCPH High-Base Pillow Block Units BLP Light Pillow Block Units

UCPH is a pedestal pillow block unit with an exceptionally high mounting base. It is ideal for applications where a shouldered shaft could create interference with the mounting surface when using a standard pillow block unit.
Available from 12 mm & 1/2" to 50 mm & 2" bore with standard duty
Cast iron housing
NA, NC & UK style are also available

BLP is a compact and lightweight pillow block unit which is ideal for limited space applications and light to moderate duty applications.
Available from 12 mm & 1/2" to 40 mm & 1-9/16" bore with light duty
Cast iron housing
ALP with SA eccentric locking collar style is also available.

UP Compact Pillow Block Units UCSP Pillow Block Units

UP is a light duty pillow block unit that is part of the Clean Series. It has a zinc-alloy housing for a high level of corrosion resistance and it is capable of accepting end covers to increase contamination resistance.
Available from 10 mm to 30 mm bore with light duty
Die-cast housing



UCSP is a pillow block unit that is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is also pre-filled with food grade grease for food processing applications.
Available from 12 mm & 1/2" to 60 mm & 1-7/16" bore with standard duty
Stainless steel housing

UCSPA Tapped-Base Pillow Block Units UCVP Plastic Pillow Block Units



UCSPA is a tapped-base pillow block unit with threaded bolt holes in the bottom of the housings. It is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is ideal for exact unit positioning and limited space applications. It is also pre-filled with food grade grease for food processing applications.
Available from 12 mm & 1/2" to 40 mm & 1-9/16" bore with standard duty
Stainless steel housing



UCVP is a pillow block unit with a corrosion resistant thermoplastic housing and the option of either a stainless steel bearing insert or a zinc chromate plated bearing insert. Both bearing inserts offer a high level of corrosion resistance and they are factory lubricated with food grade grease.
Available from 20 mm & 3/4" to 50 mm & 2" bore with standard duty
Plastic housing

SBPP Stamped Steel Pillow Block Units UCF 4-Bolt Flange Units
SBPP is a pillow block unit with a lightweight and compact stamped steel housing for light to moderate duty applications.
Available from 12 mm & 1/2" to 30 mm & 1-1/4" bore with Stamped steel housing
SAPP with SA eccentric locking collar style is also available.

UCF is a four-bolt flange unit with a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions.
Available from 12 mm & 1/2" to 140 mm bore with standard , medium, and heavy duties
Cast iron housing
UK style is also available.

NANF 4-Bolt Flange Units NCF 4-Bolt Flange Units

NANF is a four-bolt flange unit with an eccentric locking collar insert that provides a very secure grip to the shaft that becomes even more secure during continued operation. It is specifically used for single-direction/non-reversing rotation.
Available from 12 mm & 1/2" to 60 mm & 2-7/16" bore with standard duty
Cast iron housing
NCF is a four-bolt flange unit with a specially designed concentric locking collar that provides 360 degrees of shaft contact. It produces a more concentric lock on the shaft compared to other locking styles and it functions very well for high speed applications.
Available from 20 mm & 3/4" to 60mm 2-7/16" bore with standard duty
Cast iron housing
UCFS Square Piloted 4-Bolt Flange Units UCSF 4-Bolt Flange Units
UCFS is a piloted four-bolt flange unit available with a heavy duty bearing insert for a demanding operating environment. The pilot on the back of the housing allows for precise mounting where necessary.
Available from 25 mm & 1" to 140 mm bore with heavy duty
Cast iron housing
UK style is also available.



UCSF is a four-bolt flange unit that is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is also pre-filled with food grade grease for food processing applications.
Available from 20 mm & 4/3" to 60 mm & 2-7/16" bore with standard duty
Stainless steel housing

UCVF Plastic 4-Bolt Flange Units UCFL 2-Bolt Flange Units


UCVF is a four-bolt flange unit with a corrosion resistant thermoplastic housing and the option of either a stainless steel bearing insert or a zinc chromate plated bearing insert. Both bearing inserts offer a high level of corrosion resistance and they are factory lubricated with food grade grease.
Available from 20 mm & 3/4" to 40 mm &1-9/16" bore with standard duty
Plastic housing
UCFL is a two-bolt flange unit with a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions.
Available from 12 mm & 1/2" to 130 mm bore with standard , medium, and heavy duties
Cast iron housing
UK style is also available.
NANFL 2-Bolt Flange Units NCFL 2-Bolt Flange Units

NANFL is a two-bolt flange unit with an eccentric locking collar insert that provides a very secure grip to the shaft that becomes even more secure during continued operation. It is specifically used for single-direction/non-reversing rotation.
Available from 12 mm & 1/2" to 60 mm & 2-7/16" bore with standard duty
Cast iron housing
NCFL is a two-bolt flange unit with a specially designed concentric locking collar that provides 360 degrees of shaft contact. It produces a more concentric lock on the shaft compared to other locking styles and it functions very well for high speed applications.
Available from 20 mm & 3/4" to 60mm 2-7/16" bore with standard duty
Cast iron housing
BLF Light 2-Bolt Flange Units UFL Compact 2-Bolt Flange Units

BLF is a compact and lightweight two-bolt flange unit which is ideal for limited space applications and light to moderate duty applications.
Available from 12 mm & 1/2" to 40 mm & 1-9/16" bore with light duty
Cast iron housing
ALF with SA eccentric locking collar style is also available.

UFL is a light duty two-bolt flange unit that is part of the Clean Series. It has a zinc-alloy housing for a high level of corrosion resistance and it is capable of accepting end covers to increase contamination resistance.
Available from 8 mm to 30 mm bore with light duty
Die-cast housing
UCSFL 2-Bolt Flange Units SBPFL Stamped Steel 2-Bolt Flange Units


UCSFL is a two-bolt flange unit that is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is also pre-filled with food grade grease for food processing applications.
Available from 12 mm & 1/2" to 50 mm & 2" bore with standard duty
Stainless steel housing
SBPFL is a two-bolt flange unit with a lightweight and compact stamped steel housing for light to moderate duty applications.
Available from 12 mm & 1/2" to 35 mm & 1-7/16" bore with Stamped steel housing
SAPFL with SA eccentric locking collar style is also available.
UCVFL Plastic 2-Bolt Flange Units UCFA Adjustable 2-Bolt Flange Units


UCVFL is a two-bolt flange unit with a corrosion resistant thermoplastic housing and the option of either a stainless steel bearing insert or a zinc chromate plated bearing insert. Both bearing inserts offer a high level of corrosion resistance and they are factory lubricated with food grade grease.
Available from 20 mm & 3/4" to 40 mm &1-9/16" bore with standard duty
Plastic housing
UCFA is an adjustable two-bolt flange unit with a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions.
Available from 12 mm & 1/2" to 55mm & 2-3/16" bore with
Cast iron housing
UCFB & UCFBU 3-Bolt Flange Units UCFC 4-Bolt Flange Cartridge Units

UCFB and UCFBU are three-bolt flange brackets with rigid cast iron housings and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. They are available in both inch and metric bolt-hole dimensions.
Available from 12 mm & 1/2" to 50 mm & 2" bore with
Cast iron housing

UCFC and UCFCF are piloted flange cartridge units with rigid cast iron housings and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. The pilot on the back of the housing allows for precise mounting where necessary.
Available from 12 mm & 1/2" to 100 mm & 4" bore with standard and medium, duties
Cast iron housing
UK, NA styles are also available.
NCFC 4-Bolt Flange Cartridge Units SATFD Light 3-Bolt Flange Units
NCFC is a piloted flange cartridge unit with a specially designed concentric locking collar that provides 360 degrees of shaft contact. It produces a more concentric lock on the shaft compared to other locking styles and it functions very well for high speed applications.Available from 20 mm & 3/4" to 60mm 2-7/16" bore with standard duty
Cast iron housing

SATFD is a compact and lightweight three-bolt flange unit with square bolt holes for carriage bolts and a ductile iron housing for added strength. It is ideal for limited space applications and light to moderate duty applications.
Available from 12 mm & 1/2" to 35 mm & 1-7/16" bore with
ductile iron housing

SBPF Stamped Steel 3-Bolt Flange Cartridge Units UCT Take-Up Units
SBPF is a round three-bolt flange unit with a lightweight and compact stamped steel housing for light to moderate duty applications.
Available from 12 mm & 1/2" to 35 mm & 1-7/16" bore with Stamped steel housing
SAPF with SA eccentric locking collar style is also available.

UCT is a wide-slot take-up unit suitable for use in a side-mount take-up frame. It has a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions.
Available from 12 mm & 1/2" to 140 mm bore with standard , medium, and heavy duties
Cast iron housing
UK style is also available.

NAT Take-Up Units UCST Take-Up Units
NAT is a wide-slot take-up unit with an eccentric locking collar insert that provides a very secure grip to the shaft that becomes even more secure during continued operation. It is specifically used for single-direction/non-reversing rotation.
Available from 12 mm & 1/2" to 75 mm & 2-15/16" bore with standard duty
Cast iron housing



UCST is a wide-slot take-up unit that is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is also pre-filled with food grade grease for food processing applications.
Available from 20 mm & 4/3" to 50 mm & 2" bore with
Stainless steel housing

UCTH Section Steel Frame Take-Up Units UCTL Channel Steel Frame Take-Up Units
Take-Up unit with section a steel frame.
Available from 12 mm & 1/2" to 65 mm & 2-1/2" bore with
Cast iron housing and Steel frame
Take-Up unit with a channel steel frame. Available from 20 mm to 45 mm bore with
Cast iron housing and Steel frame
UCTU Channel Steel Frame Take-Up Units SBPTH Steel Plate Frame Take-Up Units
Take-Up unit with a channel steel frame.
Available from 40 mm to 90 mm bore with
Cast iron housing and Steel frame
Take-Up unit with a steel plate frame.
Available from 12 mm to 25 mm bore with
Cast iron housing and Steel frame
UCC Cartridge Units UCHA Hanger Units

UCC is a cartridge unit with two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. The cartridge housing allows for precise shaft mounting and expansion capability where necessary.
Available from 12 mm & 1/2" to 140 mm bore with standard , medium, and heavy duties
Cast iron housing
UK, NA, NC styles are also available.

UCHA is a hanger unit with a threaded-base for simple installation on a threaded pipe mounting configuration. It has two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions.
Available from 12 mm & 1/2" to 75 mm & 3" bore with
Cast iron housing